Feature Overview

There are four permanent custom access codes available for every MojoAccess device, including every MojoAccess device you’ve already purchased, and every MojoAccess device you will purchase.

These custom access codes:

• Can be from four to ten digits. The longer the code, the more secure.
• Are set and configured using the ShowMojo Mobile App.
• Are then permanent on the MojoAccess device until you change or remove them.
• Provide easy-to-recall access to any number of MojoAccess devices.
• Are different from the four access codes available as part of the Resident Access Feature Set. 

In order to use this feature, complete the Firmware Upgrade for MojoAccess Devices (this feature is not available on the Original MojoLock and MojoLock G2).

Set a Permanent Access Code

Setting a permanent access code is easy. Just:

1. Open the ShowMojo Mobile App within six feet of the MojoAccess device you want to access.
2. Locate the device in the app and click on it to open the device screen.
3. Near the bottom of the device screen, look for the Add a New Code link.
4. Click on that link and set the permanent access code.